Product Description
Worm gear and worm reducer is a kind of compact structure, large transmission ratio, under certain conditions has self-locking function of mechanical transmission.
The hollow shaft type worm gear reducer is not only has the characteristics above, and convenient installation and reasonable structure, get more and more widely used.
It is in the worm gear and worm reducer input with a helical gear reducer, consisting of multistage speed reducer can obtain very low output speed, than the single-stage worm gear deceleration machine has higher efficiency, and little vibration, low noise and energy consumption.
Our gearbox
1 larger loading capacity and compact dimension and higher efficiency and smoother and quieter functioning.
2.Longer service life.
3. higher strength and lighter weight
Loading capacity and efficiency
| Reducing speed ratio (i) |
Distance bctwccn two shafts(mm) |
Input Speed (r/min) |
Input efficicncy (KW) |
Target input Torque (NM) |
General Transmission efficiency(%) |
| 8.25 | 125 | 1500 | 17.6 | 895 | 91 |
| 144 | 1500 | 25.6 | 1185 | 89 | |
| 10 | 125 | 1500 | 14.9 | 890 | 90 |
| 144 | 1500 | 19.7 | 1130 | 88.3 | |
| 12 | 125 | 1500 | 12.4 | 1068 | 89 |
| 144 | 1500 | 17.1 | 1088 | 88 | |
| 14 | 125 | 1500 | 11.72 | 895 | 89.4 |
| 144 | 1500 | 16.33 | 1180 | 87 | |
| 16 | 125 | 1500 | 11.6 | 1000 | 88 |
| 144 | 1500 | 15.56 | 1296 | 86 | |
| 20 | 125 | 1500 | 9 | 1571 | 87 |
| 144 | 1500 | 12.46 | 1296 | 85 | |
| 25 | 125 | 1500 | 6.9 | 930 | 84 |
| 144 | 1500 | 9.44 | 1234 | 83.5 |
| Certification: | CE, ISO9001: 2000 |
|---|---|
| Condition: | New |
| Brand: | Aoya |
| Transport Package: | Wooden Case |
| Specification: | SGS |
| Origin: | Shanghai |
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-09-10