Flexible Gear Rack

Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive as high as approx 270 degrees for instance on camera focus rings. They also provide an economical alternative where a big gear is required or an extended stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear movement applications. We offer a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is usually applied only within the tooth area. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Warmth treated surface gears with high precision and strength has excellent cost-efficiency ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear level of resistance, and allows downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and number of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of tooth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of the teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Made form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Guide Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Based on the system of a versatile rack and equipment, a rotational joint actuator called vsaFGR is definitely proposed to modify the joint stiffness. The versatile gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is certainly perpendicular to the joint loading power, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for example on camera focus rings. They also offer an economical remedy where a large gear is required or an extended stretch (up to 2 metres) of linear movement is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear movement applications. You can expect a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing can be applied just within the tooth region. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack manufactured from Chromoly steel, treated simply by carburizing. Has high-power, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and quantity of teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and quantity of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and number of tooth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metal racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guide Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres in length. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on demand. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the system of a flexible rack and equipment, a rotational joint actuator named vsaFGR can be proposed to regulate the joint stiffness. The versatile gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is usually in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible gear rack is usually perpendicular to the joint loading power, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.