The EP Greenhouse gearbox is a concise and lightweight reduction geared motor with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear driver is utilized in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP geared motor is usually rainproof and windproof. The gear reducer includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is locked when the reduction gearbox is not running. The completely sealed reduction geared motor has an expansion chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all situations, even at high temps. Thanks to the use of an growth chamber, the gear driver can be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gear motor keeps the apparatus essential oil of the gear motor in optimum condition because of its entire operating lifetime. The geared motor is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an included chamber and is enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).