helical worm gear motor

Helical-worm gearmotors
Due to their style and from being coupled with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive alternative to impress you using its high level of overall performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These can be implemented individually in the modular system. In this way, they offer you a massive range of sizes, gear ratios and motor sizes.
However, their greatest strength is usually their running smoothness and their extremely low noise development. One thing is for certain – With the helical-worm gearmotors EP you are choosing a robust drive solution that you will hardly actually hear.
The overall concept also offers you a lot more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations instead of single helical-worm gear products. This is how you save additional energy in the operation of your systems and are in a position to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your person requirements – with a wide variety of AC motors. In addition, you can freely configure all of the relevant properties. In this manner, you can effectively make use of all the benefits offered by this combination of low-noise helical-worm equipment unit and performance-optimized engine. Even greater variance may be accomplished because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you are already saving time and money with this selection and task planning. The reason being our modular system enables a multitude of mixture options for gear units and motors. You can as a result reduce operating costs, count on an extended service life and reap the benefits of simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional sturdiness and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Due to their outstanding performance, these drives can be utilized in every commercial sector and customized to person torque and acceleration requirements. The decrease ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with unique lubricants, optimized form, this powerful motor achieves high degrees of effectiveness and torque. The housing machined on all sides allows diverse mounting options. Dual chamber shaft seals are utilized as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
helical worm gear motor Multiple Input Options: Essential gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Helps to keep contaminants and water away.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors established new criteria for reliability, performance and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration at this point and a truly future proof option. The EP gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in alternate positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
EP gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is certainly dust tight and hose proof,and can be utilized outdoors or in wet and dusty environments without the usage of additional enclosures. Full rated output is available at the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique combination of optimized worm wheel material with special lubricants and optimized shape, this powerful geared motor achieves high levels of performance and torque. The reduced contour design makes it ideal for implementing applications electronic.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of state of the art helical and worm gear combinations affords optimum efficiency fulfilling a wide variety of ratio requirements. The 800 BR is functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Double and triple reduction ratios
Flanged or foot mounted
All products adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared motor. A favorably priced option for the standard tasks anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC engine are directly flange mounted, the pinion is upon the motor shaft. This integrated compact design can be an essential element for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter operation usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy metal and the flanks are precision floor. The worm wheels are made from special wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Performance gearboxes in universal design. The housings are manufactured from high quality cast iron. The rugget walls and inner ribbing ensure incredibly torsional stiff and noise dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with durable walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG