Single and dual reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high speed, low torque sources to provide decreased speeds at increased torques. The input part has standard SAE pads for motor mounting. Obtainable in the three result configurations demonstrated below. Many units can be furnished with an integral parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.
Input side has standard SAE pads and hydraulic planetary drive splined insight. Output side has hub for installation automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.
Input side standard SAE pads with splined insight. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the ultimate in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of essential pinion gears.