We are focused on research and creation of products that meet up with the increasingly sophisticated electronics industry and are widely used in computers, home appliances, consumer electronics, communications, data, industry, medical and various other fields.
We also has patent for 360 degree AC PIN interchangeable type adaptor and it is leading the world’s distinctive design.
Ever-Power provides goods which are more compact, lighter, more electricity efficient, and easier to use.
We selling products across the world and receive the certifications for every single of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest regulations.
Gear adapters install between the vehicle tranny and power take-off, and may serve several purposes. Mostly, adapters are applied to improve the path of rotation of the PTO result shaft. They can be employed to space the PTO out and from the transmission case. On some imported or non-SAE common transmissions they enable the mounting of regular 6-bolt electricity take-offs. Gear Adapters can be found to fit most popular transmissions.
Several body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Matches PTO rotation to that of the driven equipment
Standard and nonstandard bolt patterns: Suits SAE typical PTOs to non-standard transmissions
• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (produces 20 to 40 HP from the power take off)
• You don’t need to modify ability take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and flat faced couplers
• Ideal for three point electric power take off products – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe methods to protect operators and high-priced machinery from circumstances when the inertia of PTO motivated put into action exceeds and over-works the tractor PTO quickness. In such a case, the over-operating coupler will free-wheel
smoothly and properly. Over-jogging clutches will normally stand up to applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Extreme shock loads or drive line angularity will certainly reduce this capability
If the space of your PTO does not fit flawlessly Pto Adapter china within a tractor, a PTO adapter can extend the size without needing to replace it for a fresh one. This adapter has an overall length of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional size on the end of your PTO. This tractor PTO shaft adapter features both a female 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection choices and is suitable for anyone that owns a mature tractor because the older parts might not be produced any more and so are less common.
The over-running coupler is an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run 
traveling source. The coupler drives solidly from tractor to put into action and free wheels efficiently when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Expected with 1000 RPM gearcase upgrade or Three Point Hitch system for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It could be easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is ranked for tractors up to 70 HP.